The Swift S5’s simple and user-friendly design enables users to splice quickly and conveniently throughout the 5 processes; stripping, cleaning, cleaving, splicing & protecting (All-In-One). The S5’s thermal automatic stripper leaves no scratches typical of a manual stripper that frequently scratches the fiber.

2 in stock


  • Integrated 5 functions in one unit (stripping, cleaning, cleaving, splicing, protecting)
  • The fusion splicer with an All-In-One system provides the best workability on the pole and also in the limited workspace
  • No scratches on fiber by thermal stripping
  • 4.3-inch color LCD monitor with touch screen & bidirectional operation system
  • Powerful lithium polymer battery with large capacity
    • More than 350 times for full cycling of splicing and Sleeving when fully charged
  • Resistance to shock, dust, and water
    • The splicer offers high reliability and stable performance even in a harsh environment
    • Shock-Free Fall: 76cm from 5 sides | Waterproof: IPx2 l Dustproof: IP5x
  • IPAAS Technology-based core alignment
    • Swift S5 is the core alignment splicer based on the IPAAS (Image Pattern Analysis Alignment System) Technology.
  • Compatible with SWIFT Fusion Splice-on Connector (FSOC) in accordance with industry standards
  • Bidirectional Operation System
    • The monitor (touch screen) can be viewed bidirectionally for the user’s preference.
  • Auto-Calibration
    • Detects the temperature, the humidity, the pressure automatically to calibrate the ARC discharge properly.

Additional information


Fiber alignment

IPAAS Core-to-Core Alignment

Applicable type of fibers

SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655), ITU-T(G.657) GI EDFA, EI980, Splicing available with different type fiber(SM/MM)

Fiber count

Single fiber

Applicable fiber dimensions

Cladding diameter: 80 ~ 150μm, Coating diameter: 100 ~ 1000μm

Fiber setting and cleaved length

250μm: 0.31in~0.63in, 900μm: 0.63in (Application holder: 0.31in)

Splicing modes

Splice mode: 100, Heat mode: 50

Splicing time

Typical 9sec

Applicable protection sleeve

1.5in, 2.4in (fiber), 1.1in or 1.3in (connector)

Storage of splice result

The last 10,000 results to be stored in the internal memory (image 10,000 results)

Operating condition

Altitude: 5,000m above sea level, Temperature:-14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof

Viewing method and display

Two CMOS cameras and 4.3-inch color LCD monitor with touch screen

Power supply

DC Lithium polymer battery (DC 14.8V, 8400mAh), 100~240V AC adapter

No. of splice cycles with battery

320 cycle


USB, RCA, external power (DC 12V available for car cigar jack)


There are no reviews yet.

Be the first to review “SWIFT S5”

Your email address will not be published. Required fields are marked *

For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.

Vendor Information

  • No ratings found yet!

Product Enquiry