-
CIBANO 500
CIBANO 500 combines a micro-ohmmeter, timing analyzer, and a coil and motor supply. All important CB tests on all types of CBs can be carried out even when a station battery is not available.
Its globally unique connection technology reduces the wiring effort and time required up to 50 %. In addition, OMICRON’s Primary Test Manager™(PTM)-Software and the included circuit breaker testing library (CBTL) ensure convenient operation and deliver one clear, combined report for all the tests performed.
Datasheet: CIBANO 500 Brochure
For More Details: https://www.omicronenergy.com/en/products/cibano-500/ -
CMC 310
CMC 310 is specifically designed for basic three-phase testing of protection and measurement devices. It is operated by the CMControl P software which runs on the CMControl P unit, a Windows PC or on an Android tablet. Its intuitive user interface and the test tools included are optimized for quick manual testing in the field.
Datasheet: CMC 310 Brochure
For More Details: https://www.omicronenergy.com/en/products/cmc-310/
-
CMC 356
CMC 356 is the universal solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode: up to 64 A / 860 VA per channel) with a great dynamic range, make the unit capable of testing even high-burden electromechanical relays with very high power demands.
n
The CMC 356 is the first choice for applications requiring the highest versatility, amplitude and power. Commissioning engineers will particularly appreciate its ability to perform wiring and plausibility checks of current transformers, by using primary injection of high currents from the test set.
nDatasheet: CMC 356 Brochure
n
nFor More Details: https://www.omicronenergy.com/en/products/cmc-356
n -
CMC 430
CMC 430 is the preferred choice for test engineers in cases where excellent transportability is needed and three currents up to 12.5 A or six voltage outputs are sufficient. Its low weight of just 8.7 kg / 19.2 lbs, and robust design with its edge protection predisposes the device to every outdoor and indoor use. Typically, this device is most suitable in environments where numerical and communication based protection prevails.
n
With this extraordinarily high precision, it is also an ideal source based calibrator for all kinds of measurement devices, such as energy meters, transducers, PQ meters, and PMUs.
nDatasheet: CMC 430 Brochure
n
nFor More Details: https://www.omicronenergy.com/en/products/cmc-430/
n -
CPC 100
The patented CPC 100 primary injection test system replaces several individual testing devices. This reduces the costs for training and transport, and cuts down testing time. Therefore, the CPC 100 is the ideal test set for substation asset commissioning and maintenance. You can operate the CPC 100 via the integrated front panel, or by using the Primary Test ManagerTM (PTM) software on your laptop.
Datasheet: CPC 100 Brochure
For More Details: https://www.omicronenergy.com/en/products/cpc-100/
-
CT Analyzer
-
- Injects low test signals into secondary side of the CT
-
- Determines the CT‘s equivalent circuit parameters
-
- Identifies all relevant CT performance parameters
-
- Displays all relevant parameters of the CT and its accuracy at different currents and burdens
-
- Evaluates the CT according to the selected standard
-
- Determines unknown CT nameplate parameters
-
- Demagnetizes the CT after the test.
Datasheet: CT Analyzer Brochure
For More Details: https://www.omicronenergy.com/en/products/ct-analyzer/
-
-
DANEO 400
DANEO 400 is a hybrid measurement system that records and analyzes all conventional signals (voltages, currents, hard wired binary status signals) and messages on the communication network in a substation. It measures signals from both of these worlds and can provide information to assess their proper coordination. The device keeps track of what is going on in the substation by obtaining information on the operational status and communication.
Datasheet: DANEO 400 Brochure
For More Details: https://www.omicronenergy.com/en/products/daneo-400/
-
FRANEO 800
FRANEO 800 was developed for testing the mechanical and electrical integrity of power transformers after transportation or exposure to high fault currents. It uses the sweep frequency response analysis (SFRA) principle and measures the electrical transfer function over a wide range of frequencies. With our FRANEO 800 you can improve your transformer reliability, reduce maintenance costs and prevent expensive failures.
Datasheet: FRANEO 800 Brochure
For More Details: https://www.omicronenergy.com/en/products/franeo-800/
-
Montesto 200
MONTESTO 200 is a portable, two-in-one solution that enables you to perform both on-line partial discharge (PD) measurements and temporary on-line PD monitoring: It can be used on various medium-voltage and high-voltage electrical assets under load to assess insulation condition. You can use the IP65 rated MONTESTO 200 both indoors and outdoors. Automated software features enable users to quickly and reliably identify and locate signal source.
Datasheet: MONTESTO 200 Brochure
For More Details: https://www.omicronenergy.com/en/products/montesto-200/
-
MPD 600
MPD 600 PD measurement and analysis system is used worldwide for type and quality control testing at many well-known manufacturers of electrical equipment. It is also used by utilities, industrial plants and service companies for the regular inspections and maintenance of electrical equipment. The MPD 600 is also an important research tool at test laboratories and universities.
Datasheet: MPD 600 Brochure
For More Details: https://www.omicronenergy.com/en/products/mpd-600/ -
TESTRANO 600
TESTRANO 600 is the world’s first portable, three-phase test system which supports all common electrical tests on single- and three-phase power and distribution transformers for routine and diagnostic testing on-site or during factory acceptance tests (FAT).
Using TESTRANO 600 enables you to perform various tests on power transformers without re-connecting. Thus, TESTRANO 600 cuts testing time down to one third compared to conventional single-phase test sets.
Datasheet: TESTRANO 600 Brochure
For More Details: https://www.omicronenergy.com/en/products/testrano-600/
-
VOTANO 100
VOTANO 100 is the first portable device (15 kg/33 lbs) which offers highly accurate voltage transformer tests. This allows to use VOTANO 100 not only for electrical performance checks, but also for class verification and calibration. It performs quick tests of all kinds of inductive voltage transformers (VTs) and capacitive voltage transformers (CVTs) for both protection and metering purposes.
It performs quick tests of all kinds of inductive voltage transformers (VTs) and capacitive voltage transformers (CVTs) for both protection and metering purposes.
Datasheet: VOTANO 100 Brochure For More Details: https://www.omicronenergy.com/en/products/votano-100/